- Wind-machine.com - The specialist of the Antifreeze Tower - Project Study - Marketing - Service
- +33 6 64 96 27 05
- contact@tour-antigel.com
Thermoboost
Thermoboost
Technical characteristics
Heating System Thermoboost
| Material | Refractory Steel |
| Burner | Diesel |
| Pump operation | Via tractor PTO or directly, on the engine |
| Height | 6 metres |
| Power | 12 volts for fans |
3 heating positions for 3 power levels | 600 000 Calories/hour 1,200,000 Calories/hour 1,800,000 Calories/hour |
In order to benefit from THERMAL INVERSION, the tower must be put into operation when the temperature is still positive between +0,5° and +1,5° (wet temperature).
The use of heater when the temperature reaches the critical point,
allows an increase to +2°C of the temperature of the protected area.
With black frost, without thermal inversion,
the use of the tower with an external heat source is essential.
* Theoretical layout under the influence of air mass, with positive thermal inversion, air humidity of 75%, non-dry soils, without winds, with sufficient heating, within the limit of a white frost of -2.5°C. This document has only an indicative and non-contractual informative value, not engaging the responsibility of RN7AS, nor the results obtained.
