- Wind-machine.com - The specialist of the Antifreeze Tower - Project Study - Marketing - Service
- +33 4 28 79 00 14
- contact@tour-antigel.com
Thermoboost VF6 – VF8
Thermoboost VF3
15 March 2022
Thermoboost VF6 - VF8
technical characteristics
Heating System Thermoboost VF6-VF8
| MATERIAL | Refractory Steel |
| Height | 4 metres |
| Burner Thermoboost VF6 | burner x6 Pellet |
| Power Thermoboost VF6 | 500 kW/hour |
| Burner Thermoboost VF8 | burner x8 Pellet |
| 4 heating positions for 4 power levels (VF8) | 200 kW/hour 400 kW/hour 600 kW/hour 800 kW/hour |
| Peculiarity | Adaptable to all brands of machines |
In order to benefit from THERMAL INVERSION, the tower must be put into operation when the temperature is still positive between +0,5° and +1,5° (wet temperature).
The use of heater when the temperature reaches the critical point, allows an increase to +2°C of the temperature of the protected area.
With black frost, without thermal inversion,
the use of the tower with an external heat source is essential.
* Theoretical layout under the influence of air mass, with positive thermal inversion, air humidity of 75%, non-dry soils, without winds, with sufficient heating, within the limit of a white frost of -2.5°C. This document has only an indicative and non-contractual informative value, not engaging the responsibility of RN7AS, nor the results obtained.